Slackwax (Light & Heavy)

General description

Slack wax is the crude wax produced by chilling and solvent filter-pressing wax distillate. There are basically three types of slack wax produced, the type depending on the viscosity of the lube oil being dewaxed: low neutral, medium neutral, and heavy neutral.

Slack wax is a mixture of oil and wax, obtained from lubricating oil. Slack wax is the crude wax produced by chilling and solvent filter-pressing wax distillate. It serves as feedstock and that is further refined and blended to create value-added petroleum wax products.

Application: in the production of wax emulsions, construction board, matches, Glass wool and textile treating, synthetic firelogs, matches, inks, weed bars, carbon paper, composite wood panels, chemicals and fertilizers, Paraffin wax production and candle production, in arena footing, in soil or turf protection, polishes, in fireplace products. Applied externally, these waxes can also function as good dust suppressants and/or controlled-release agents for various and also Rust protective products and waterproofing agents in the manufacture of various industrial products. 

In fully refined products may be filtered to remove color and odor. Our Slack waxes offer a wide variety of physical and performance characteristics that are suitable for use in various product and process applications: these benefits include: the wide range of melting points, blended and single distillate products, high flash points, high n-paraffin contents.

slack waxes for many different applications. Due to our widespread sources of raw material we are able to meet almost any specification of our customers and to develop products according to their requirements. slack waxes that contain a relatively high percentage of normal paraffin; this promotes the formation of large wax crystals and helps contribute to hard surface coatings with good water repellent characteristics.

  • Chia sẻ qua viber bài: Slackwax (Light & Heavy)

PRODUCT LIST

Loading...

HOT PRODUCT

Paraffin Wax

Paraffin Wax is a series of semi-refined and fully-refined paraffin waxes with narrow melting point range. It is a translucent crystalline material in the solid state and becomes a white clear liquid when molten. It is derived from Slack Wax through carefully controlled refining process. High melting point, low oil content and low penetration are among its main features.

Paraffin Slabs/Granular: semi-refined & Fully-refined

Paraffin Wax full grade specification:

Paraffin Wax

Grade

Oil Content

%wt Max.

Melting Point °c

Color min SUS

Penetration 0.1mm @25°c

Viscosity@ 100°c (cSt)

Test Method

ASTM, D-721

ASTM, D-87

Saybolt

ASTM, D-1321

ASTM, D-445

L1

1

60-62

28

18-23

3.6-4.4

L2

2

58-60

28

15-19

3.6-4.4

L3

3

58-61

28

18-23

3.6-4.4

L5

5

55-60

-

18-23

3.6-4.4

L10

10

54-59

-

18-23

3.6-4.4

UL1

1

58-61

29

Max 24

3.6-4.4

UL2

2

58-61

29

Max 24

3.6-4.4

M1

1

62-66

28

15-19

4.5-6.4

M2

2

62-65

28

15-19

4.5-6.4

M3

3

61-65

28

15-19

4.5-6.4

M5

5

60-65

20

15-19

4.5-6.4

M10

10

60-65

-

15-19

4.5-6.4

MB1

1

64-66

25

Max 19

4.5-6.4

MB2

2

63-65

25

Max 19

4.5-6.4

H1

1

68-71

22

Max 21

6.5-8.0

H2

2

68-71

22

Max 23

6.5-8.0

H3

3

67-69

18

Max 23

6.5-8.0

H5

5

67-69

-

Max 23

6.5-8.0

H10

10

66-69

-

-

6.5-8.0

Lubcut

Raw material for lubricant refinery

 80% BS150, 10% RAE, 10% microwax

BASE OIL

GROUP I/II/II

N150/SN300/SN500/SN600/BS150

N70/N150/N500/N600

Base Oil Groups Explained 

Almost every lubricant used in plants today started off as just a base oil. The American Petroleum Institute (API) has categorized base oils into five categories (API 1509, Appendix E). The first three groups are refined from petroleum crude oil.

Group IV base oils are full synthetic (polyalphaolefin) oils. Group V is for all other base oils not included in Groups I through IV. Before all the additives are added to the mixture, lubricating oils begin as one or more of these five API groups.

 

Carbon Black N220/N326/N375/N330/N550/N660/N774

Carbon Black is a reinforcing filler mainly used in rubber compounds, and improvement in rubber properties is a function of basic physical and chemical properties of carbon black, including size and composite structure, particle size (surface area), active surface and porosity, fineness. Carbon black is manufactured in a wide range of surface finishes and area combinations and structures to provide maximum rubber compounding flexibility in tailoring their specific rubber compound requirements.

The most common use (70%) of carbon black is as a colorant and reinforcement stage in automobile tires. Carbon black also helps conduct heat away from the tire and tread area, reducing heat damage and increasing tire life.

Mostly it's classified with Hard grade and Soft Grade

- Hard Grade: N220/N326/N375/N33

- Soft Grade: N550/N660/N774

 

RELATED PRODUCTS